ReferenceDesignLibrary

Refine Search

Eval Board Output Power Voltage In Voltage Out THD @ Conditions Efficiency @ Conditions Features Component Count + Extras Design Author Switching Frequency Application / Target Market Main I.C. Base Part
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (19)

19 Results - Page 1/2 |< < 1 2 > >|

EVL6562A-35WFLB: 35W PFC, 48V, 90 ~ 265 VAC

Manufacturer: STMicroelectronics

The board is a 35 W, wide-range mains input, power factor corrected SMPS (switched mode power supply) suitable for all low power applications requiring a high PF (power factor), such as lighting applications and power supplies for LEDs. The low-cost L6562A and the simple flyback topology combine to provide a very competitive PFC controller solution.

View Design

EVAL4981A: 360W @ 400V, 88 ~ 264 VAC

Manufacturer: STMicroelectronics

The L4981 integrated circuit is a continous mode average current controller with several specific functions for active power factor correction. It can operate in high quality, medium/high power conversion range and provides all the necessary features to achieve a very high power factor, up to 0.99. Thanks to the BCD technology used, operative switching frequency higher than 200kHz can be used.

View Design

UCC28063EVM-723: 300W PFC, 390V, 85~265V in

Manufacturer: Texas Instruments

The UCC28063 is a dual-phase, transition-mode Power Factor Correction (PFC) pre-regulator. The UCC28063EVM-723 is an evaluation module (EVM) with a 390-V, 300-W, dc output that operates from a universal input of 85 VRMS to 265 VRMS and provides power-factor correction.

The pre-regulator uses the UCC28063 PFC interleaved controller to shape the input current wave to provide power-fact…

View Design

DER-274: 900W, 380V Out, 180 ~ 264VAC in

Manufacturer: Power Integrations

This document is an engineering report describing a PFC power supply utilizing a HiperPFS PFS729EG integrated PFC controller. This power supply is intended as a general purpose evaluation platform that operates from 180 VAC to 264 VAC input and provides a regulated 380 VDC output voltage and a continuous output power of 900 W.

This power supply can deliver the rated power at 230 VAC …

View Design

UCC28019EVM: 350W PFC, 390V, 85 ~ 265Vin

Manufacturer: Texas Instruments

The UCC28019 evaluation module (EVM) is a 350-W off-line Power Factor Correction (PFC) boost converter providing a 390-V regulated output at 0.9 A of load current. The PFC converter accommodates an input voltage range of 85 VAC to 265 VAC and uses average current mode control at a fixed frequency of 65 kHz. The UCC28019 incorporates a wide range of protection features to ensure safe system operati…

View Design

EVAL6563-80W: PFC 88 ~ 264 Vin, 220 ~ 390 Vout

Manufacturer: STMicroelectronics

L6563 is a current-mode PFC controller operating in Transition Mode (TM). Based on the core of a standard TM PFC controller, it offers improved performance and additional functions, such as active tracking boost function. In some applications it may be advantageous to regulate the output voltage of the PFC pre-regulator so that it tracks the RMS input voltage rather than at a fixed value like in …

View Design

ADP1048-600-EVALZ: PFC 600W, 85 ~ 265VAC

Manufacturer: Analog Devices Inc.

This evaluation board features the ADP1048 in a typical AC/DC switching power supply in an interleaved boost power factor correction (PFC) topology. The circuit is designed to provide a rated load of 385V/600W from an AC input voltage source of 85 to 265 VRMS AC.

View Design

RDK-236: 347W PFC, 380VDC, 90 ~ 264 VAC in

Manufacturer: Power Integrations

This document is an engineering report describing a PFC power supply utilizing a HiperPFS PFS714EG integrated PFC controller. This power supply is intended as a general purpose evaluation platform that operates from universal input and provides a regulated 380 V DC output voltage and a continuous output power of 347 W.

View Design

NCP1631PFCGEVB(#2): 390V @ 300W, 95 ~ 265VAC in

Manufacturer: ON Semiconductor

Interleaved PFC is an emerging solution that becomes particularly popular in applications where a strict form factor has to be met like for instance, in slim notebook adapters or in LCD TVs. Interleaving consists in paralleling two “small” stages in lieu of a bigger one, which may be more difficult to design.

Practically, two 150−W PFC stages are combined to form our 300−W PFC pre−r…

View Design

UCC28060EVM: 390V @ 300W, 85 ~ 265V in

Manufacturer: Texas Instruments

The UCC28060 is a dual-phase, transition-mode Power Factor Correction (PFC) pre-regulator. The UCC28060EVM is an evaluation module (EVM) with a 390-V, 300-W, dc output that operates from a universal input of 85 VRMS to 265 VRMS and provides power-factor correction.

Optimized for high-volume consumer applications, this solution extends the advantages of transition mode—high efficiency…

View Design
19 Results - Page 1/2 |< < 1 2 > >|