The circuit on EVAL-CN0355-PMDZ is a complete, low power signal conditioner for a bridge type sensor and includes a temperature compensation channel.

The FUSB302 evaluation board (FUSB302BGEVB) and included software allows customers a complete platform to evaluate the Type-C interface detection solution the FUSB302 provides. The evaluation board is designed for both stand-alone operation and connection to test equipment for specific testing requirements. The FUSB302 software provides both fully automatic control and manual control of the FUSB302 functions.

The MAXREFDES145# 8-Channel IO-Link® Master Quick Start Guide describes the steps required to quickly get the MAXREFDES145# reference design up and running by controlling it with TEConcept's Control Tool IO-Link master software.

The UB232R is the smallest USB – serial development module in the FTDI product range. To minimise the size of the module, the UB232R uses a standard USB mini-B connector. It is ideal for new development purposes as well as a platform for adding a USB interface to existing product designs.

The ADuM4160 is designed primarily as an isolation element for a peripheral USB device. However, there are occasions when it is useful to isolate a host device. Several issues must be addressed to use the ADuM4160 for this application. Whereas the buffers on the upstream and downstream sides of the ADuM4160 are the same and capable of driving a USB cable, the downstream buffers must be capable of…

In industrial control, industrial automation, motor control, and process automation applications, binary/digital sensors and switches are frequently required. Systems often need many optocouplers for isolating each sensor channel.

The NXP TDA5051A is a complete Amplitude Shift Keying (ASK) modem for transmitting and receiving digital signals on standard power line or any two-wire AC or DC network. It is a cost-effective solution that transmits at a rate of 600 baud (typical) and 1200 baud (maximum), operates from a single 5 V supply, and enables easy connection to standard microcontrollers, including NXP's LPC11xx series o…

The system processes 4 mA to 20 mA input signals using a single 3.3 V supply. The total error after room temperature calibration is ±0.06% FSR over a ±10°C temperature change, making it ideal for a wide variety of industrial measurements.

The circuit on EVAL-CN0179-PMDZ is a 4 mA-to-20 mA current loop transmitter for communication between a process control system and its actuator.

The A5191HRTNGEVB evaluation board includes all external components needed for operating theA5191HRT IC