PIC GmbH's SMD reed switches are available with or without housing and are suitable for high-volume applications.
Abracon's AMJM, AMJD, AMPM, and AMPD series MEMS-based, power consumption optimized oscillators are ideal for industrial and consumer applications.
Fluke's 430 series II power quality and energy analyzers offer the best in power quality analysis and can monetarily quantify energy losses.
TRACO's DIN rail power supplies are safety qualified to UL HazLoc Class 1 Division 2 and ATEX for applications in harsh environments and hazardous locations.
Bantam Tools' desktop PCB milling machine advanced bundle comes with a 2-year warranty when the required parts are purchased together.
The MIC28515 from Microchip Technology is an adjustable frequency, synchronous buck regulator that features a unique adaptive on-time control architecture.
ECS' ECX-1637B miniature tight stability SMD crystal is offered in a 2.0 mm x 1.6 mm x 0.45 mm industry standard ceramic package.
MEAN WELL's XLG series of waterproof LED drivers can be used for LED bay lighting, street lighting, horticulture lighting, and floodlight applications.
MACOM’s MAPS-010145 is a 4-bit digital phase shifter with an integrated CMOS driver in a 4 mm plastic, surface-mount package.
TDK's VFS series filters are compact noise suppression components for home appliances that accommodate high currents.
STMicroelectronics' ST25R3916 is a high-performance NFC universal device supporting NFC initiator, NFC target, NFC reader, and NFC card emulation modes.
Schtoeta's ESP32-WROOM-32 is a powerful low-power Wi-Fi Bluetooth® module that targets a wide variety of applications.
MACOM's MADT-011000-DIE is a single-ended, internally matched power detector with wide frequency range and high dynamic range.
TE Connectivity’s RZF series is a line of compact relays that offer through-hole technology (THT) printed circuit board (PCB) terminals.
Amphenol ICC's QSFP DD interconnect system is comprised of a 76-position, 0.8 mm pitch connector built for use in high-speed serial applications.
Silicon Labs offer a wide range of timing solutions from oscillators & buffers to clocks & design tools. Check out Digi-Key’s selection of timing products from Silicon Labs today!
ECS' ECX-2236B is a miniature, tight stability, SMD crystal in a 2.5 mm x 2.0 mm x 0.55 mm industry standard ceramic package.
KOA's TLRH series chip-type current sense resistors use metal plate technology to improve corrosion resistance and withstand higher temperatures.
KOA's WG73 wide terminal type surge current flat chip resistor is superior to the WK73 in pulse withstanding voltage.
GroupGets' PureThermal 2 Smart I/O and PureThermal Mini Smart I/O modules are hackable thermal USB webcams for the FLIR® Lepton® thermal imaging camera core.
KOA UR73 and UR73V series resistors are designed for high accuracy and current detection, offering a low resistance range and high operating temperature.
KOA Speer Electronics offers a wide range of metal plate resistors and jumpers to suit various customer needs.
Use the KEMET product selection guides to find capacitors, relays, inductors, and more from KEMET available at Digi-Key. View datasheets and order today!
OSRAM’s horticulture LED portfolio contains reliable, best in class LED lighting to enable photosynthesis & ensure growth in your vegetation whether home or professional applications.Publish Date: 2019-03-18
Bourns® SM453229-xx1N7Y Chip LAN transformers and common mode chip inductors are well-suited for use in a variety of telecommunication and network devices.
ACL Staticide’s Mighty Mask II washable solder mask for closed-loop water systems protects against unwanted soldering of protected areas during wave soldering.
Hirose offers mating interfaces, terminations, cable connectors, and coaxial switches for digital and analog test board applications.
KOA's RN73H metal chip resistors feature power rating of 0.063 W to 0.25 W, resistances up to 1 MΩ, and maximum working voltages between 50 V and 400 V.
MACOM's MAAP-011233 is a 4-stage, 4 W power amplifier assembled in a lead-free 5 mm 32-lead AQFN plastic package.
STMicroelectronics' STM32WB multi-protocol, wireless 32-bit MCU Arm®-based Cortex®-M4 features FPU, Bluetooth® 5, and 802.15.4 radio solution.
KOA's SR73 series of low-ohm current sensing chip resistors offers many package sizes, resistance values, and tolerances, as well as a wide temperature range.
MACOM's MAMX-011036/54 wideband double-balanced mixers offers a wide IF bandwidth for applications including microwave radio, test and measurement, and radar.
The AFBR-S50MV85G is Broadcom's multipixel distance and motion measurement sensor based on the optical time-of-flight principle.
ACL Staticide’s ESD knit gloves protect against static discharge without sacrificing ergonomic performance.
CEL's high quality and high-reliability deep ultraviolet (UV-C) LEDs emit light at either 265 nm or 275 nm wavelengths that destroy bacterial and viral DNA.
Renesas' ISL8210M/12M/80M/82M DC/DC power modules operate from a single wide input power rail and are designed for battery-operated applications.
Trenz Electronic's TE0741 integrates a Xilinx Kintex®-7 FPGA, eight multi-gigabit transceivers, 32 MB Flash memory, and powerful switch-mode power supplies.
Wurth Electronics' WA-EXRV series features a screw-less connection, allowing time savings and fast mounting during mass production.
Self-stick liquid protection fabric from 3M™ helps productivity, reduces maintenance and cleanup time, and protects valuable workspaces from damage.
The Wurth and Infineon 200 W wireless development kit is easily integrated into any product design and offers numerous advantages.
ISSI introduces its family of IS25LP (2.5 V / 3 V) and IS25WP (1.8 V) series of Flash devices.
Vesper's VM1000 is a low-noise, high dynamic range, single-ended analog output piezoelectric MEMS microphone.
Vesper's VM1010 is a low-noise, single-ended analog MEMS microphone with a Wake-on-Sound mode providing an ultra-low power always-listening solution.
Hirose's TM11 EMI-protected modular connectors have been developed from the TM series connectors to resist noise and comply with the FCC 68 standard.
Hirose's HR10 connectors have a one-touch push-pull coupling mechanism that assures easy and quick connecting by pushing any part of the connector housing.
STMicroelectronics presents a trench gate field-stop IGBT, 650 V, 50 A soft switching IH series in a TO-247 long leads package.
Littelfuse POWR-SPEED® fuses are specifically designed to protect devices that are typically designed into power conversion and power conditioning equipment.
The Murata Power Solutions NXJ2 series is a range of lower-profile, fully-automated manufacture surface mount DC/DC converters.
Bourns' SF-2923HC-C and SF-2923UC-C series SinglFuse™ SMD fuses achieve high inrush current withstand with greater reliability in harsh environments.
Altran's AMI-M32A heavy-duty, space-saving metal enclosed filters offer rugged bolt connections for industrial applications.
KEMET’s NBL series Langevin bolt-on Piezoelectric transducers are used wherever powerful ultrasonic waves must be generated.
Microchip's expanded memory dsPIC® offer increased Flash memory and triple program RAM, ideal for automotive and wireless charging applications.
TE offers a large variety of products and components to meet the demands of light fixtures, retrofit lamps, power to luminare, and other lighting applications.Publish Date: 2013-07-23 Updated: 2019-03-13
Taiwan Semiconductor's MOSFETs are packaged in a small form factor PDFN56 package for improved power density in application.
TRACO Power's 15 W, 20 W, and 30 W 5 VOUT DC/DC converters with a “-A1” suffix feature an extended trim range up to 6 VDC.
NXP's PTN36502 can operate with 1.8 V VDD which is a common voltage rail across mobile platforms/systems.
American Electrical's DIN-rail Power over Ethernet injectors can provide IP cameras, wireless access points, VOIP phones, or other devices with power and LAN.
3M™ 442KW double coated film tape features a thin polyester film carrier for dimensional stability and improved handling.
The CPC7524 quad high-voltage isolated analog switch array from IXYS provides the switching functionality of four normally open relays in one small package.
Delta's line of solenoids with permanent magnet latch features are advantageous for power-saving applications.
American Electrical's PoE 3, 4, or 8-port unmanaged, hardened, industrial-grade switches are designed to reliably connect PoE devices in harsh environments.
Bourns' 12 V rated Model MF-NSML/X series of low resistance surface mount polymer positive temperature coefficient (PPTC) resettable fuses.
Molex off-the-shelf overmolded cable assemblies help solve tooling start-up costs by providing a completed assembly that meets the IPC-specification design.
NXP's flagship i.MX applications processors are the broadest line of Arm®-based industrial applications processors and microcontrollers.
MACOM's MADP-011104 diode provides exceptional switch or attenuator performance from 50 MHz to 5 GHz.
Allegro MicroSystems' ALS31313 automotive grade, 3D, linear Hall effect sensor's design optimizes sensor performance and power consumption at the system level.
Amphenol ICC's waterproof USB Type-C™ connectors are tailored for emerging product designs and support a variety of protocols.
XP Power's EPL150 series AC/DC power supplies feature 100 W output with convection cooling and up to 150 W with as little as 10 CFM airflow.
MACOM's MASW-011102-TR0500 combination of broadband performance with fast switching and excellent settling time make this device ideal for many applications.
CUI VOF family of open frame ac-dc power supplies are available at DigiKey. VOFs offer efficient performance, compact size and low power consumption.
MACOM’s MASW-011105 is fabricated using a robust process with full surface passivation for high performance and high reliability.
RECOM’s complete medical-grade power solutions are fully tested drop in solutions and adhere to the stringent requirements of the medical industry.
MACOM's MAPD-011053 2-way 0° power divider is ideally suited for all CATV broadband and FTTx applications.
Altech’s multi-color LED tower light with buzzer and flasher mode that can light up in five different colors.
Amphenol's waterproof Micro USB 2.0 comes with full metal shielding that protects against EMI, RFI, and ESD.
Amphenol’s Cool Edge Connectors are an open pin field design, ideal for many BTB applications requiring a high speed, high-power card edge style connector solution.Publish Date: 2019-03-11
MACOM's MASW-011107-DIE combination of broadband performance, very fast switching, and excellent settling time make this device ideal for many applications.
RECOM targets Industry 4.0 and IoT applications with high efficiency AC/DC and DC/DC converters changing battery power to a usable voltage for smart devices.Publish Date: 2018-02-13 Updated: 2019-03-11
Aven’s Neo-Light LED task lamp offers ultra-bright, even illumination with 60 energy-efficient LEDs to control brightness and color temperature.
STMicroelectronics' PSMC series of rectifiers lets designers create devices with higher thermal performance in a compact size with a cost-effectiveness target.
STMicroelectronics STEVAL-POEL45W1 45 W PoE powered LED lighting system with BLE control improves energy efficiency and simplifies installations.
Signal Transformer Multipurpose, SMD, and HCTI design kits provide a variety of inductors to designers of DC/DC converter processing equipment.
Weidmuller's PUSH IN technology of the Klippon® Connect A-Series reduces connection times for solid wires and wires with crimped on wire-end ferrules.
FLIR's digital multimeters with built-in IGM™ (Infrared Guided Measurement) helps users identify failing components early.
FLIR’s pro-grade thermal camera for smartphones help users quickly get to the job of finding hidden problems, documenting repairs and sharing images over Wi-Fi.
Apex Tool Group’s Zero Smog® TL kit fume extraction system has an exceptionally long service life due to a maintenance free brushless EC turbine.
The Pimoroni PIM365 is a thermal imaging camera breakout board that utilizes the sophisticated Melexis MLX90640 far-infrared camera sensor.
Digilent's Pmod™ I2S2 supports 24-bit resolution per channel at input sample rates up to 108 kHz and output sample rates up to 200 kHz.
Bourns® CW105550A and CW161009A chip inductor series are wound on a ceramic core which provides stable electrical characteristics.
Amphenol Advanced Sensors' NKI series has a built-in capacitor for RF decoupling which provides EMI and self-heating protection.
FLIR's E4, E5, E6, and E8 infrared cameras are intuitive with a user-friendly interface for measurements in thermal or MSX mode.
SiTime's Emerald Platform™ OCXOs are a game-changing, MEMS timing solution for 5G infrastructure applications.
STMicro's SPC58 Chorus G line consists of general-purpose 32-bit Power Architecture® microcontrollers targeting body, networking, and security applications.
STMicroelectronics' transient voltage suppressors (TVS) are made to resist the stress levels specified to meet all application requirements.
RECOM's RP12 series medium powered DC/DC module, suitable for extra wide continuous input voltage ranges of 36 VDC to 160 VDC, has a 90% efficiency rating.
Amphenol ICC Slim Cool Edge hybrid power and signal connectors feature modular tooling allowing multiple power-signal combinations for vertical configurations.
FLIR's Exx-Series™ advanced thermal imaging cameras help identify hot spots and potential points of failure in electrical distribution and mechanical systems.
RECOM has expanded their product line of 1 W open-frame SMD converters with the R1ZX series.
RECOM extends their open-frame SMD portfolio with the R0.5ZX series, a thumbnail-sized 0.5 W DC/DC converter.
ON Semi's RSL10 sensor development platform is a compact and a comprehensive platform to easily develop IoT applications.